To record video, you need a video source (such as a video tape, camcorder) and a video capture board. For recording sound, you need an sound board (such as Creative Labs Sound Blaster).
To capture video using Video
Capturix, the capture board must be compatible with Video for Windows.
Your system must have the appropriate Video for Windows drivers
installed on it.
You need to connect the
your video source to your video capture board. See in your hardware manual
for the hardware setup and configuration.
To record digital video you need a fast computer and lots of disk storage space. The video resolution, the number of colors, and the frame rate all affect the filesize of the motion video.
If you want to capture a motion video using the best resolution and quality, you will need lots of disk storage space.
1. Select 
“Movie Capture” . This option will activate movie capture toolbar.
2. You have to set filename
and destination, press 
.
3. If you want to capture
video with audio press 
,
the default position is on, to turn off press again. (CTRL-A)
4. If you want to insert
other information in your AVI, 
must be on, if you press 
you will edit copyright information.
5. Adjust frame rate. This option sets the number of frames captured per second. Decreasing the frame rate reduces the processing time.
- If you want to adjust frame rate to 29.97 fps (some NTSC formats) double click on FPS display.
6. Adjust duration of your movie, if you want to stop manualy capture operation, press “No Limit”.
7. Choose compression method,
press 
.
Autostart – Used to capture after a preset time.
Recording – Start capture immediately.Motion – Used to start capturing when video image changes.
9. If “Attach other information to AVI file” option is activated.