User Manual 

Motion detection

Motion detector ables you to start capture when video image changes.

There are two problems that may occur, in full black images like no signal, probably capturix will detect movement every time because this is a motion detector.

You can ajust the sensibility of motion detector, i named it tolerance because this controls the trigger with this method:

When a image is displayed this image takes a value of 100%, then trigger is activated when image changes x %.

The minimum is 1% (will start capture when image changes 1%) and maximum is 15 % (will start capture when image changes 15%)

The default value is 8 %, then you may adjust tolerance if you want more or less sensibility 

Atention:  If you increase tolerance you will decrease sensibility.

 1998-2004 © VideoCapturix.com -  Alexandre Simões, All rights reserved. PORTUGAL