User Manual 

Multiple frame capture
 

This capture type allow user to set a time between each image or just capture frame-per-frame using manual shoot button. Brings you many possibilities to your video capture card, for example,  make animations or capture clouds movement.
It gives you three diferent save type: Avi file, Multiple BMP files or Refresh same file.
To capture a multiple frame sequence:

1. Select Multiple frame capture, press 

You will get this toolbar:

2. Choose save type:

Movie file .AVI – All frames will be saved on a movie file (.AVI)

Viewer Frame Rate – set this option to select movie viewer frame rate.

Multiple file .BMP or .JPG – Each frame will be saved on a different file ( eg: PIC01.BMP,PIC02.BMP, PIC03.BMP,…)

Refresh same file – All frames will be saved on the same file, updating  this file continuous
 
3. Set filename and destination, press 

4. If you select “Movie file .AVI” ,choose compression method, see “Video Compression”

5. Internet Broadcast:

        If you want to upload each image to a FTP Server just click in , first you must set all Internet Settings (Internet Settings):

Directory must be the entire path. (Leave blank if you want to save in root)

If you leave unpressed you will disable FTP operation.

 

6. Select 

        Manual Shoot if you want to control each frame capture.

            Timed Shoot if you want to capture with time interval.

           Trigged Motion if you want to capture each frame when image have motion.

7. If you don’t want to use “Manual Shoot” adjust Time between frames.

8. Press “Record” , “Autostart” or "Motion"

 

Counter

Counter  – This feature ables use to costumize the counter of the multiple frames:

Example if you enter:

Filename: capturix.jpg

000156 - the counting will be  capturix000156.jpg, capturix000157.jpg, ........

0000000000 - the counting will be  capturix0000000000.jpg, capturix0000000001.jpg, ........

1 -  the counting will be  capturix1.jpg, capturix2.jpg, ........